S8VK-X

Dati sulle parti EPLAN
S8VK-X Switch Mode Power Supply Catalogo tecnico

Alimentatore switching S8VK-X

Compatibile con EtherNet/IP e Modbus TCP, massimizzando la disponibilità del sistema attraverso il collegamento di apparecchiature ad IoT

Tempistiche calcolate per la sostituzione del prodotto, la tensione di uscita, la corrente di uscita ed altro sono acquisiti tramite rete e possono essere gestiti simultaneamente

Lo stato del prodotto può essere verificato in loco tramite il display
Funzionamento possibile a temperature ambiente da -40 a 70°C
Power boost: 150% (240 e 480 W)
Possibile montaggio side-by-side (fino a 55°C)
Conformità a UL Classe 2 (90 W o meno)
Conformità a EN/IEC 61558-2-16
PCB rivestiti per una maggiore resistenza alle condizioni ambientali

Caratteristiche ed info per ordinare

Ordering information

Note: For details on normal stock models, contact your nearest OMRON representative.

With Indication monitor

Power rating	Rated input voltage	Rated output voltage (DC)	Rated output current	Maximum boost current	Order code
90 W	100 to 240 VAC (allowable range: 85 to 264 VAC, 90 to 350 VDC)	24 V	3.75 A	−	S8VK-X09024A-EIP
120 W		24 V	5 A	6 A	S8VK-X12024A-EIP
240 W		24 V	10 A	15 A	S8VK-X24024A-EIP
480 W		24 V	20 A	30 A	S8VK-X48024A-EIP

Without Indication monitor

Power rating	Rated input voltage	Rated output voltage (DC)	Rated output current	Maximum boost current	Order code
30 W	100 to 240 VAC (allowable range: 85 to 264 VAC, 90 to 350 VDC)	5 V	5 A1	6 A	S8VK-X03005-EIP
60 W		12 V	4.5 A2	5.4 A	S8VK-X06012-EIP
60 W		24 V	2.5 A	3 A	S8VK-X06024-EIP
90 W		24 V	3.75 A	−	S8VK-X09024-EIP
120 W		24 V	5 A	6 A	S8VK-X12024-EIP
240 W		24 V	10 A	15 A	S8VK-X24024-EIP
480 W		24 V	20 A	30 A	S8VK-X48024-EIP

Accessories (Order Separately)

Mounting Brackets

Power rating	Mounting direction	Model number
30 W, 60 W	Front mounting	S82Y-VS10F
30 W, 60 W	Side mounting	S82Y-VS10S
240 W, 480 W	Front mounting	S82Y-VK10F

DIN Rail Mounting

Part name	Model number
Mounting Rail (Material: Aluminum)	PFP-100N
	PFP-50N
	PFP-100N2
End Plate	PFP-M

Recommended EtherNet/IP Communication Cables

Use an STP cable (shielded twisted pair cable) of Category 5 or above.

Part name	Manufacturer	Model number
Cable	Hitachi Metals, Ltd.	NETSTAR-C5E SA 0.5×4P3
RJ45 connector	Panduit Corp.	MPS588-C1

Recommended Industrial switching hubs

Shape	Name	Specification			Order code
Shape	Name	Functions	No. of ports	Failure detection function	Order code
	Industrial switching hub	Priority control (QoS): EtherNet/IP control data priority Failure detection: Broadcast storm/ LSI abnormality detection 10/100BASE-TX, Auto-Negotiation	3	No	W4S1-03B
			5	No	W4S1-05B
			5	Yes	W4S1-05C

Specifications

Power rating			30 W	60 W
Rated output voltage			5 V	12 V	24 V
Indication monitor			None	None	None
Efficiency		115 VAC input	78% typ.	85% typ.	85% typ.
Efficiency		230 VAC input	77% typ.	86% typ.	86% typ.
Input conditions	Voltage range		Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
	Frequency		50/60 Hz (47 to 450 Hz)
	Input current	115 VAC input	0.53 A typ.	0.99 A typ.	1.1 A typ.
	Input current	230 VAC input	0.32 A typ.	0.61 A typ.	0.67 A typ.
	Power factor		−
	Leakage current	115 VAC input	0.5 mA max.
	Leakage current	230 VAC input	1 mA max.
	Inrush current	115 VAC input	16 A typ.
	Inrush current	230 VAC input	32 A typ.
Output characteristics	Rated output current		5 A	4.5 A	2.5 A
	Rated output power		25 W	54 W	60 W
	Maximum boost current		6 A	5.4 A	3 A
	Voltage adjustment range		4.5 to 5.8V (with V. ADJ)	10.8 to 14 V (with V. ADJ)	21.6 to 28 V (with V. ADJ)
	Ripple noise voltage	100 to 240 VAC input	130 mVp-p max. at 20 MHz of bandwidth	120 mVp-p max. at 20 MHz of bandwidth	110 mVp-p max. at 20 MHz of bandwidth
	Input variation influence		0.5% max.
	Load variation influence		1.5% max.
	Temperature variation influence	100 to 240 VAC input	0.05%/°C max.
	Start up time	115 VAC input	1000 ms max.	1000 ms max.	1000 ms max.
	Start up time	230 VAC input	1000 ms max.	1000 ms max.	1000 ms max.
	Hold time	115 VAC input	45 ms typ.	20 ms typ.	20 ms typ.
	Hold time	230 VAC input	240 ms typ.	120 ms typ.	110 ms typ.
Additional functions	Overload protection		Yes, automatic reset, intermittent operation type.
	Overvoltage protection		Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again).
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Parallel operation		Yes (For up to two Power Supplies).
	Output indicator		Yes (LED: Green)
	Alarm indicator		Yes (LED: Red)
	Indication monitor	Measurement and display details	Refer to datasheet.
	Indication monitor	Main display	None
	Ethernet communication	Measurement and display details	Refer to datasheet.
		Communication protocol	EtherNet/IP, Modbus TCP
		Physical layer	100BASE-TX
		Communication specifications	Refer to datasheet.
Insulation	Withstand voltage		3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports), current cutoff 20 mA
			2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
			1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
			0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
	Insulation resistance		100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
	Insulation resistance		100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
Environment	Ambient operating temperature		−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
	Storage temperature		−40 to 85°C (with no condensation or icing)
	Ambient operating humidity		95% max. (Storage humidity: 95% max.)
	Vibration resistance		10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Reliability	MTBF		160,000 hrs typ.
Reliability	Life expectancy		10 years min.
Construction	Weight		250 g max.	250 g max.	250 g max.
	Cooling fan		No
	Degree of protection		IP20 by EN/IEC 60529

Note: For further information please refer to datasheet.

Power rating			90 W		120 W
Rated output voltage			24 V		24 V
Indication monitor			Included	None	Included	None
Efficiency		115 VAC input	86% typ.	87% typ.	90% typ.	90% typ.
Efficiency		230 VAC input	87% typ.	88% typ.	92% typ.	92% typ.
Input conditions	Voltage range		Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
	Frequency		50/60 Hz (47 to 450 Hz)		50/60 Hz (47 to 63 Hz)
	Input current	115 VAC input	1.7 A typ.	1.7 A typ.	1.2 A typ.	1.2 A typ.
	Input current	230 VAC input	1.0 A typ.	1.0 A typ.	0.63 A typ.	0.63 A typ.
	Power factor		−		0.9 min.
	Leakage current	115 VAC input	0.5 mA max.
	Leakage current	230 VAC input	1 mA max.
	Inrush current	115 VAC input	16 A typ.
	Inrush current	230 VAC input	32 A typ.
Output characteristics	Rated output current		3.75 A		5 A
	Rated output power		90 W		120 W
	Maximum boost current		−		6 A
	Voltage adjustment range		23.0 to 24.1 V		21.6 to 28 V (with V. ADJ)
	Ripple noise voltage	100 to 240 VAC input	300 mVp-p max. at 20 MHz of bandwidth		150 mVp-p max. at 20 MHz of bandwidth
	Input variation influence		0.5% max.
	Load variation influence		1.5% max.
	Temperature variation influence	100 to 240 VAC input	0.05%/°C max.
	Start up time	115 VAC input	1000 ms max.		1000 ms max.
	Start up time	230 VAC input	1000 ms max.		1000 ms max.
	Hold time	115 VAC input	25 ms typ.		35 ms typ.
	Hold time	230 VAC input	130 ms typ.		35 ms typ.
Additional functions	Overload protection		Yes, automatic reset, intermittent operation type.
	Overvoltage protection		Yes, 110% or higher of rated output voltage (90 W), 130% or higher of rated output voltage (120 W), power shut off (shut off the input voltage and turn on the input again.
	Series operation		Yes (For up to two Power Supplies, external diodes are required.)
	Parallel operation		Yes (For up to two Power Supplies).
	Output indicator		Yes (LED: Green)
	Alarm indicator		Yes (LED: Red)
	Indication monitor	Measurement and display details	Refer to datasheet.
	Indication monitor	Main display	7-segment LED (White)	None	7-segment LED (White)	None
	Ethernet communication	Measurement and display details	Refer to datasheet.
		Communication protocol	EtherNet/IP, Modbus TCP
		Physical layer	100BASE-TX
		Communication specifications	Refer to datasheet.
Insulation	Withstand voltage		3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports), current cutoff 20 mA
			2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
			1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
			0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
	Insulation resistance		100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
	Insulation resistance		100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
Environment	Ambient operating temperature		−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
	Storage temperature		−40 to 85°C (with no condensation or icing)
	Ambient operating humidity		95% max. (Storage humidity: 95% max.)
	Vibration resistance		10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Reliability	MTBF		110,000 hrs typ.	150,000 hrs typ.	110,000 hrs typ.	140,000 hrs typ.
Reliability	Life expectancy		10 years min.
Construction	Weight		350 g max.		400 g max.
	Cooling fan		No
	Degree of protection		IP20 by EN/IEC 60529

Note: For further information please refer to datasheet.

Power rating			240 W		480 W
Rated output voltage			24 V		24 V
Indication monitor			Included	None	Included	None
Efficiency		115 VAC input	91% typ.	91% typ.	92% typ.	92% typ.
Efficiency		230 VAC input	93% typ.	93% typ.	94% typ.	94% typ.
Input conditions	Voltage range		Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
	Frequency		50/60 Hz (47 to 63 Hz)		50/60 Hz (47 to 63 Hz)
	Input current	115 VAC input	2.4 A typ.	2.4 A typ.	4.6 A typ.	4.6 A typ.
	Input current	230 VAC input	1.2 A typ.	1.2 A typ.	2.3 A typ.	2.3 A typ.
	Power factor		0.9 min.
	Leakage current	115 VAC input	0.5 mA max.
	Leakage current	230 VAC input	1 mA max.
	Inrush current	115 VAC input	16 A typ.
	Inrush current	230 VAC input	32 A typ.
Output characteristics	Rated output current		10 A		20 A
	Rated output power		240 W		480 W
	Maximum boost current		15 A		30 A
	Voltage adjustment range		21.6 to 28 V (with V. ADJ)
	Ripple noise voltage	100 to 240 VAC input	140 mVp-p max. at 20 MHz of bandwidth		130 mVp-p max. at 20 MHz of bandwidth
	Input variation influence		0.5% max.
	Load variation influence		1.5% max.
	Temperature variation influence	100 to 240 VAC input	0.05%/°C max.
	Start up time	115 VAC input	1000 ms max.		1000 ms max.
	Start up time	230 VAC input	1000 ms max.		1000 ms max.
	Hold time	115 VAC input	35 ms typ.		25 ms typ.
	Hold time	230 VAC input	35 ms typ.		25 ms typ.
Additional functions	Overload protection		Yes, automatic reset, intermittent operation type.
	Overvoltage protection		Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again).
	Series operation		Yes (For up to two Power Supplies; external diodes required.)
	Parallel operation		Yes (For up to two Power Supplies)
	Output indicator		Yes (LED: Green)
	Alarm indicator		Yes (LED: Red)
	Indication monitor	Measurement and display details	Refer to datasheet.
	Indication monitor	Main display	7-segment LED (White)	None	7-segment LED (White)	None
	Ethernet communication	Measurement and display details	Refer to datasheet.
		Communication protocol	EtherNet/IP, Modbus TCP
		Physical layer	100BASE-TX
		Communication specifications	Refer to datasheet.
Insulation	Withstand voltage		3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports),
			2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
			1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
			0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
	Insulation resistance		100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
	Insulation resistance		100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
Environment	Ambient operating temperature		−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
	Storage temperature		−40 to 85°C (with no condensation or icing)
	Ambient operating humidity		95% max. (Storage humidity: 95% max.)
	Vibration resistance		10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Reliability	MTBF		100,000 hrs typ.	130,000 hrs typ.	90,000 hrs typ.	120,000 hrs typ.
Reliability	Life expectancy		10 years min.
Construction	Weight		700 g max.		1,100 g max.
	Cooling fan		No
	Degree of protection		IP20 by EN/IEC 60529

Note: For further information please refer to datasheet.

Standards

Standards	Harmonic current emissions		Conforms to EN 61000-3-2
	EMI	Conducted emissions	Conforms to EN 61204-3 Class B, EN 55011 Class B
		Radiated emissions	Conforms to EN 61204-3 Class B, EN 55011 Class B
	EMS		Conforms to EN 61204-3 high severity levels
	Safety standards		UL 508, ANSI/ISA 12.12.01 (Listing) (For 30 W, 60 W, and 90 W only Class 2 Output: Per UL 1310) CSA C22.2 No. 107.1, CSA C22.2 No. 213 (cUL) (For 30 W, 60 W, and 90 W only Class 2 Output: Per CSA C22.2 No. 223) UL 60950-1, UL 62368-1 (Recognition) OVC II ( ≤ 3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS) CSA C22.2 No. 60950-1, No. 62368-1 (cUR) OVC II ( ≤ 3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS) EN 50178 OVC III ( ≤ 2000 m) OVC II (2000 m < and ≤ 3000 m) Pol2 EN 60950-1, EN 62368-1 OVC II ( ≤ 3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS) EAC (TR CU 004 / 2011, TR CU 020 / 2011) RCM (EN61000-6-4) Korea Radio Waves Act (Law No. 10564) Conforms to PELV (EN/IEC 60204-1) Conforms to EN/IEC 61558-2-16
	SEMI		Conforms to F47-0706 (200 to 240 VAC input)

Note • EMI (radiated emissions) conform to Class B when this Power Supply is installed in a control panel.
• EN/IEC 61558-2-16
The S8VK-X was designed based on EN/IEC 61558-2-16.
Currently, IEC 61558-2-17 has been replaced by IEC 61558-2-16.
When certification was received for EN/IEC 60204-1 (Machinery Safety), it was necessary to go through a control transformer to the control circuits. However, a control transformer is not always necessary for product that have been certified for the safety standard for OVCIII or for product that use a transformer that conforms to EN/IEC 61558-2-16.
• Safety Standards for a DC Input
When DC is used, UL 60950-1, UL 62368-1, cUR (CSA 22.2 No. 60950-1), cUR (CSA C22.2 No. 62368-1), EN/IEC 60950-1, EN/IEC 62368-1, EN 50178 and EN/IEC 61558-2-16 are applicable to safety standards.
Safety standard compliance is achievable by connecting a UL-certified fuse as specified below.
Select an external fuse that satisfies the following conditions:
S8VK-X03005-EIP, S8VK-X06012-EIP, S8VK-X06024-EIP (350 VDC or more, 6 A)
S8VK-X09024⬜-EIP, S8VK-X12024⬜-EIP, S8VK-X24024⬜-EIP (350 VDC or more, 8 A)
S8VK-X48024⬜-EIP (350 VDC or more, 12 A)
• To comply with PELV output requirements for EN/IEC 60204-1, ground the negative side of the output (-V) to a protective earth (PE).

1. Output power is 25 W at rated output current.

2. Output power is 54 W at rated output current.

3. We recommend use of these cables and connectors in the above combinations.

1. Output power is 25 W at rated output current.

2. Output power is 54 W at rated output current.

3. We recommend use of these cables and connectors in the above combinations.

Schede opzionali

S8VK-R

L'unità S8VK-R, associata agli alimentatori switching, è il sistema di backup per le applicazioni critiche che richiedono: affidabilità assoluta e zero tempo d’inattività.

Modulo tampone c.c. da utilizzare per impedire l'interruzione dell'alimentazione in caso di cadute di tensione momentanee. S8TS-DCBU-02 fornisce un tempo di backup di 500 ms a una corrente in uscita di 2,5 A. Può essere collegato all'uscita a 24 Vc.c di qualsiasi alimentatore switching.

S8M

Con S8M, la macchina diventerà conforme alla norma UL Classe 2 e la corrente di intervento massima è di 3,8A per canale (regolabile). L'unità controlla fino a 4 circuiti. Inoltre, è possibile controllare le sequenze di avvio/arresto nonché le funzioni di visualizzazione e allarme, quali tensione, corrente in uscita, tempo di funzionamento, temperatura oltre i limiti e riassetto esterno. È possibile impostare queste funzioni mediante i pulsanti posti sul frontale o per mezzo del software di supporto fornito gratuitamente. Le impostazioni possono essere protette.

S8V-NF

Tipo con montaggio su guida DIN, ideale per quadri di controllo, dal design sottile che garantisce un risparmio di spazio, connessioni "Push-In" per un cablaggio semplice e sicuro

Area di download

Brochure

S8VK-X Brochure EN Brochure

enPDF 3 MB

Mostra tutto brochure

File descrittivi del dispositivo

S8VK-X-201712 File EtherNet/IP EDS

enZIP 30 KB

Mostra tutto file descrittivi del dispositivo

Cataloghi

S8VK-X Switch Mode Power Supply Catalogo tecnico

enPDF 2 MB

Mostra tutto cataloghi

Manuali

S8VK-X Switch Mode Power Supply Manuale sulla Comunicazione

enPDF 3 MB

Mostra tutto manuali

Avete delle domande?

Siamo a vostra intera disposizione.

Contattateci

Iscrivetevi agli aggiornamenti di prodotti

Newsletter sulle ultime novità e innovazioni in termini di prodotti, soluzioni e servizi direttamente nella vostra casella di posta.

Grazie per la tua iscrizione! Riceverai a breve una E-mail di conferma con un link per attivare il servizio. Questo sistema di iscrizione è stato scelto per ottemperare alla legge sulla privacy e garantisce la riservatezza del tuo indirizzo E-mail.

Purtroppo abbiamo problemi tecnici. Il tuo modulo non è stato ricevuto correttamente. Ci scusiamo per l'inconveniete e ti chiediamo per favore di riprovare più tardi.

Download

Documentazione di prodotto

Scarica le schede tecniche, i manuali e le brochure.

Vai al Download Center

Corsi di formazione

Accedete ai corsi di formazione offerti dai nostri tecnici qualificati. Dal livello principiante ad avanzato.

Visualizzate i corsi di formazione

Usiamo i cookie per offrirti la migliore esperienza possibile sul nostro sito Web.

Login

Registrati

Grazie per aver effettuato la registrazione al sito Omron

ottieni l'accesso diretto

Grazie per aver mostrato interesse nei confronti della nostra azienda

Country Selector

S8VK-X

Alimentatore switching S8VK-X

Ordering information

With Indication monitor

Without Indication monitor